Red Wing - 8138 - Classic Moc Toe (Briar Oil Slick)
2,250.00 DKKSize Guide
For clothing sizing information, please read the description of the given product carefully.
If no sizing information is available, please do not hesitate to ask us before purchasing.
We will do our best to respond as quickly as possible.
Have a sizing question? Let us know.
Measure and compare, before purchase. Below here, you can see how we measure our jeans.
HOW TO FIND YOUR BOOT SIZE
If you are shopping for a pair of Red Wing shoes or boots, the first thing to consider with regards to sizing is this:
Most Red Wing boots, like the well known Iron Rangers and Moc Toes run a bit ¨big¨. Therefore we recommend sizing down half a size from your sneaker-size. However, the Red Wing chukkas (3140, 3141 etc.) are true to size. Therefore we recommend ordering your sneaker-size if you are purchasing chukkas.
Please read the sizing-description on each style carefully, before ordering.
There are many shoe size systems globally, with the US, UK, European and Japanese size systems as the most common ones. The US system also has a special category for athletic shoes.
In Europe, shoe makers are supposed to follow the same shoe-size system. Note however, that sizes might differ between e.g. France and Germany. The sizes also aren't totally standardized, which means that shoes from different manufacturers might have different sizes, although they have the same measurements.
Size charts are used to convert between different international shoe size systems. Notice that these size charts are only to be seen as guides meant to help you find your right size. Sizes and size charts may differ notably between different shoe manufacturers and brands. See the Brund shoe/boot size chart here.
In order to build a Goodyear Welted boot (e.g. a Red Wing boot) to an exact size and width, the boot is constructed around a shoe last.
A last is used in shoemaking to give footwear its three-dimensional shape. Resembling the human foot, the last determines toe, heel and girth dimensions for fit, style and function.
Do notice that there is no such thing as a "normal foot" and therefore not a standard shoe last - and therefore also not a "normal shoe size". Add to that the fact that most people’s right and left feet have different measurements.Learn about Red Wing lasts and the Anatomy of a Red Wing at www.redwingheritage.com.
Most shoemakers make some of their shoes in multiple widths, from narrow to extra-wide.
US width is measured as A, B, C, D, E, EE, with A as the narrowest, EE as the widest. The standard and most common width used in Europe is D.
The right size
A new pair of e.g. Red Wing Heritage boots should fit comfortably tight on your foot, with enough room to freely wiggle your toes.
The full grain leather upper, leather footboard and cork midsole mold to your feet, creating an enduring and customized fit over time, with each wear.
Measuring your feet
Stand up straight on a hard surface with your heel against the wall and a piece of blank paper taped to the floor, flush against the wall beneath your foot.
Have a friend mark the longest part of your foot (referred to as heel-to-toe length) on the paper with a pen, or measure yourself if necessary. Repeat with the other foot, as right and left sizes may be different. Use a ruler to measure the heel-to-toe length you marked for each foot.
When using the chart, take note that ”CM” is NOT your heel-to-toe length in centimeter (cm), but the official shoe size (CM)
If you have a medium or standard foot and use US 9,5 in New Balance Lifestyle, you will probably use US 9 in Red Wing.
I use US 9,5 in New Balance Lifestyle and my right foot measurement is 28,5 centimeters from heel-to-toe.
Confused ? – then, please read from ”Size systems” again ;-)
The Classic 6" Work Moc Toe, 8138, is identical to the iconic 875, but this is the leather variant "Briar oil slick" also from Red Wing's tannery, S.B.Foot.
Red Wing’s Classic Work boots were designed and built to withstand the daily rigors of the work day on the farm and in the factory. The lightweight crepe sole featured a minimal tread design to reduce the mud that would cling to a farmer’s boots but still provide the underfoot comfort the work day required. Red Wing would brand the crepe sole as the Traction Tred sole. These classic boots featured a moc toe design. The name came from the word moccasin, the Algonquian Indian word for shoe. This combination of the u-shaped moc toe leather upper and the white crepe sole would become the iconic boot style for the Red Wing brand. It is one of the oldest Red Wing styles and a best-seller.
Care: Boot Oil, (Leather Cleaner)
Red Wing Shoes are listed in US sizes. The width of the 8138 is D and it is made using last no. 23. As they run a bit big, we recommend sizing down half a size from your sneaker-size.