DANNER - Danner Light - Cedar Brown
3,100.00 DKKSize Guide
For clothing sizing information, please read the description of the given product carefully.
If no sizing information is available, please do not hesitate to ask us before purchasing.
We will do our best to respond as quickly as possible.
Have a sizing question? Let us know.
Measure and compare, before purchase. Below here, you can see how we measure our jeans.
HOW TO FIND YOUR BOOT SIZE
If you are shopping for a pair of Red Wing shoes or boots, the first thing to consider with regards to sizing is this:
Most Red Wing boots, like the well known Iron Rangers and Moc Toes run a bit ¨big¨. Therefore we recommend sizing down half a size from your sneaker-size. However, the Red Wing chukkas (3140, 3141 etc.) are true to size. Therefore we recommend ordering your sneaker-size if you are purchasing chukkas.
Please read the sizing-description on each style carefully, before ordering.
There are many shoe size systems globally, with the US, UK, European and Japanese size systems as the most common ones. The US system also has a special category for athletic shoes.
In Europe, shoe makers are supposed to follow the same shoe-size system. Note however, that sizes might differ between e.g. France and Germany. The sizes also aren't totally standardized, which means that shoes from different manufacturers might have different sizes, although they have the same measurements.
Size charts are used to convert between different international shoe size systems. Notice that these size charts are only to be seen as guides meant to help you find your right size. Sizes and size charts may differ notably between different shoe manufacturers and brands. See the Brund shoe/boot size chart here.
In order to build a Goodyear Welted boot (e.g. a Red Wing boot) to an exact size and width, the boot is constructed around a shoe last.
A last is used in shoemaking to give footwear its three-dimensional shape. Resembling the human foot, the last determines toe, heel and girth dimensions for fit, style and function.
Do notice that there is no such thing as a "normal foot" and therefore not a standard shoe last - and therefore also not a "normal shoe size". Add to that the fact that most people’s right and left feet have different measurements.Learn about Red Wing lasts and the Anatomy of a Red Wing at www.redwingheritage.com.
Most shoemakers make some of their shoes in multiple widths, from narrow to extra-wide.
US width is measured as A, B, C, D, E, EE, with A as the narrowest, EE as the widest. The standard and most common width used in Europe is D.
The right size
A new pair of e.g. Red Wing Heritage boots should fit comfortably tight on your foot, with enough room to freely wiggle your toes.
The full grain leather upper, leather footboard and cork midsole mold to your feet, creating an enduring and customized fit over time, with each wear.
Measuring your feet
Stand up straight on a hard surface with your heel against the wall and a piece of blank paper taped to the floor, flush against the wall beneath your foot.
Have a friend mark the longest part of your foot (referred to as heel-to-toe length) on the paper with a pen, or measure yourself if necessary. Repeat with the other foot, as right and left sizes may be different. Use a ruler to measure the heel-to-toe length you marked for each foot.
When using the chart, take note that ”CM” is NOT your heel-to-toe length in centimeter (cm), but the official shoe size (CM)
If you have a medium or standard foot and use US 9,5 in New Balance Lifestyle, you will probably use US 9 in Red Wing.
I use US 9,5 in New Balance Lifestyle and my right foot measurement is 28,5 centimeters from heel-to-toe.
Confused ? – then, please read from ”Size systems” again ;-)
As far as this boot is concerned, it's still the golden era of backpacking. To build it, Danner bootmakers sought out leathers similar to those used on the original Danner Light, introduced in 1979. This classic-inspired boot features stitchdown construction and a Vibram Kletterlift outsole for stable traction on a variety of terrain. The Danner Light Cedar Brown is still built by hand, in our Portland, Oregon factory with rich full grain leather, denier nylon panels and a waterproof GORE-TEX liner.
Known for its resistance to abrasions, tears and scuffs, DANNER combined Cordura Denier nylon with DANNERs full-grain leather to create an incredibly strong and durable upper.
This boot is 100% waterproof and breathable, GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.
Handcrafted to provide a wider platform, the legendary stitchdown construction offers increased stability underfoot and this stitchdown boot can be recrafted.
Care recommendation: Leather Conditioner (and Leather Cleaner)
DANNER are listed in US sizes. Most US boots is made in width D. The last is 650 and the width is EE. If you have a broad front foot, you may go down half a size from your normal size.